Zephyr ZTO-M795 manual CONTROLS FILTER CLEAN INDICATOR Metal Filters, Filter Clean Reminder

10 FEATURES & CONTROLS

CONTROLS: FILTER CLEAN INDICATOR (Metal Filters)

Filter Clean Reminder (Standard Metal Filters fitted)

Whether your hood is installed as an Exhaust or Purifying unit, a set of metal filters are fitted by the factory. These Metal Filters are intended to filter out residue from cooking. It need not be replaced on a regular basis but are required to be kept clean. The Filter Clean Reminder function in the microprocessor will automatically indicate by a flashing

when the metal filters are needed to be cleaned after every 30 hrs. of use. Filters can be cleaned by hand or in a dishwasher with non-abrasive soap. Heavily soiled filters should also be soaked in grease cutting detergent such as '409' or its equivalent, prior to cleaning.

Filter Clean Reminder:

When flashes on display, the metal

filters installed are required to be cleaned. This will occur after every 30 hours of use.

Re-setting Function:

Reset the Filter Clean Reminder timer when filters are cleaned and re-installed. Press

and hold for approx. 5 seconds, the display will appear; hold for approximately

5 seconds until on display disappears

. The Filter Clean Reminder function is now re-set and a new 30 hours elapse cycle is initiated.

Clean Filters

display <A> flashes

To Reset

hold 5 secs. display from <C> to < >