![](/images/new-backgrounds/1049491/4949195x1.webp)
∙Chain Number
∙Preset Chain and Number
∙Step Number
This information is displayed when the “Chain” button is pressed.
The following Table shows the location of each of these information labels:
Chain Name | Chain Number |
Preset Name & Number | Step Number |
Example: |
|
|
|
No Name 5 | 5 |
Heaven 17 | 1 |
CREATING CHAIN PRESETS
Press the CHAIN button on the front of your ZETA SYNTHONY II, and select the desired chain preset using the +/- Value buttons. Press the EDIT button, and you are now ready to begin programming your chain. The following parameters can be accessed by pressing the +/- Parameter buttons:
CHAIN PRESET NAME (max. 12 Characters)
Use a name that describes the function of of your chain, e.g. the name of the song with which it will be used. Press the ENTER button and use the +/- Value buttons to select each character and the +/- Parameter buttons to maneuver to the next (or previous) character.. Press the EXIT button when you are finished naming your Chain Preset. As with all other
PROGRAM (1…128)
Use the +/- Value buttons to select the desired Preset number for the present step. Press the ENTER button. This moves you to the next step in the chain.
43