![](/images/new-backgrounds/1049491/4949111x1.webp)
ZMC-200 Front Panel
3a | 6 | 8 | 10 | 12 | 14 | 16 |
1 | 2 | 3 | 4 | 5 | 7 | 9 | 11 13 | 15 | 17 |
1.ZETA MIDI CABLE input. Connect your Zeta instrument to this jack using the Zeta MIDI cable provided.
2.
position in order for violins equipped with Zeta’s
3.VOLUME CONTROL: Controls the output of the
3a DISPLAY CONTROL: Adjusts contrast level of LCD display.
4.DISPLAY: The high contrast LCD display shows preset names as well as
various parameters some of which are shown graphically.
5.PRESET: Using the PRESET button, you can change from GLOBAL, UTILITY and CHAIN modes directly to PRESET mode. The LED just to the left of the PRESET button shows you the status. In PRESET mode, the presently selected preset is shown in the display. You also have the option of seeing the built in instrument tuner in the bottom half of the display. Use the +/- Value buttons to cycle through and select presets. In the
6.GLOBAL : Using this button, you have access to general system settings such as MIDI channel instrument settings as well as the default values of all MIDI controllers. In addition you can prohibit output of Panorama, Reverb, Chorus and Variation controllers separately. In the
7.STORE: The STORE button allows you to save preset data, arpegiattor patterns, drum sequences and chains to the permanent
1
ZETA Music Systems, Inc.