Advanced Setup
62 6212-I3 4-Port Router User’s Guide 6212-A2-ZB83-20

Modulation Methods

The following modulation methods are supported by the 6212 ADSL router:
zG.d mt E na bl ed
zG.lite Enabled
zT1.413 Enabled
zADSL Enabled
zAnnex L Enabled
zADSL2+ Enabled.
Do not change this setting unless so directed by your ISP.

Capability

The following are included under Capability:
zBitswap Enable
zSRA (Seamless Rate Adaptation) Enable
Do not change these settings unless so directed by your ISP.
DSL Advanced Settings
Do not change the DSL Advanced Settings unless so directed by your ISP. To
view the DSL Advanced Settings screen, click on the Advanced Settings
button on the DSL Settings screen (see Figure69).
There are five test modes between the router and your ISP:
zNormal test: Puts the router in a test mode in w hich it only sends a
Normal signal.
zReverb test: Puts the router in a test mode in which it only sends a Reverb
signal.
zMedley test: Puts the router in a test mode in wh ich it only sends a
Medley signal.
zNo Retrain: In this mode the router will try to establish a connection as in
normal mode, but once the connection is up it will not retrain if the signal
is lost.
zL3: Puts the router into the L3 power state.
Select a test mode and click on Apply. Then click on Tone Selection.