Technical Specifications
ADSL2+ Modem (Conexant)
Dimensions
■Dimension : 105 (L) x 105 (W) x 30 (H) mm
Weight
■Weight : Approx. 250g
Power
■12VDC, 0.8Amp
Interfaces
■DSL Line: RJ11
■Ethernet: 10/100BaseT
■USB 1.1
Standards Support
■ATM Support
-
-Support for multiple PVC's up to 16
-RFC 1483/2684 (Bridged/Routed Ethernet over ATM)
■Routing/Bridge Support
-Transparent Bridge Support
-DHCP Server
-DNS Relay Agent
-Dynamic DNS Support
-DMZ support
-Static Routing
-RIPv1 and RIPv2
-Policy based QoS (TOS, 802.1p, Source/Destination IP Address, Source/Destination Port, Protocol)
-IGMP v1/v2
-SNTP support
-IP Sec and PPTP/L2TP VPN pass through support
-QOS (802.1p) support
-Port fowarding
-Port to PVC mapping
■PPP Support
-PAP/CHAP authentication
-PPPoA
-PPPoE
■Security
-NAT for Basic Firewall support
-Ingress and Egress Packet Filtering
-Stateful Packet Inspection
-Protection against Denial of Service attacks
■DELT support
Protocol Support
■ANSI T1.413 (Full Rate ADSL)
■ITU G.992.1 (DMT)
■ITU G.992.2 (G.lite)
■ITU G.992.3 (ADSL2)
■ITU G.992.5 (ADSL2+)
■ITU G.994.1 (G.hs)
■ITU G.997.1
■Annex L
Management
■
■CLI
■Telnet Remote Management
■SNMP Support
■FTP/TFTP firmware upgrade and configuration backup/restore
■Syslog Support
■
Bandwidth/Distance
■Downstream Speeds up to 24 Mbps using ADSL2+ (2.2 Mbps with ReachDSL)
■Upstream speeds up to 2 Mbps with ADSL2+ (2.2 Mpbs with ReachDSL)
Regulatory Compliance
■FCC Part 15, Part 68
■CE
Operating Requirements
■Operating Temperature: 32° F to 104° F (0° C to 40° C)
■Storage Temperature:
■Humidity: 5% to 95%,
Ordering Information
|
|
|
|
| ADSL2+ BRID/RTR, ANNEX A, NA |
| |
| ADSL2+ BRID/RTR, ANNEX A, UK |
| |
| ADSL2+ BRID/RTR, ANNEX A, EURO |
| |
| ADSL2+ BRID/RTR, ANNEX A, INDIA |
| |
| ADSL2+ BRID/RTR, ANNEX B, UK |
| |
| ADSL2+ BRID/RTR, ANNEX B, EURO |
| |
|
|
|
|
|
|
|
|
2008/05/19 10:58:55