Znyx Networks ZX340Q Wiring Guidelines, For 100BaseTX Fast Ethernet and 10BaseT Ethernet, Page

Wiring Guidelines

For 100BaseTX (Fast Ethernet) and 10BaseT (Ethernet)

•All cables must be Category 5 (or better).

•Maximum distance is 100 meters.

•Only 1, 2, 3 and 6 are used.

•Pins 1 - 2 should use the same twisted pair; 3 - 6 should use the same twisted pair.

Network connections may be made at any time during installation or system operation. If re- cabling the network becomes necessary, during system operation, care should be taken not to interrupt any current network sessions that may be active.

The selection of the media speed and duplex mode is made either automatically by the auto- negotiation protocol or manually through management interface. In most cases, it is best to let the auto-negotiation protocol supported by the adapter to select the media speed and type. It will attempt to make connections in the following order.

1.100 Mbps, Full Duplex

2.100 Mbps, Half Duplex

3.10 Mbps, Full Duplex

4.10 Mbps, Half Duplex

If none of the above works, no link will be established.

ZX340Q Series User Guide Page 6