Locate
Click to make the PCM96 Surround display flash, so you can easily find the curently selected PCM96 Surround in a large rack full of PCM96 Surrounds.
Update
Click to automatically update the PCM96 Surround software via the
Internet.
PCM96 Surround Setup Dialog
When you click the PCM96 Surround Communication button in the PCM96 Surround Control Panel, the PCM96 Surround Setup dialog appears.
Communications Interface
Select your computer’s connection to the PCM96 Surround here. Choose from FirewireTM or “Ethernet X,” where “X” is a number corresponding to your computer’s network interface card.
Driver Buffer Setting
This control manages latency. Choose from Max Latency (highest latency, least chance of audio droput), Slow (higher latency, less chance of audio
dropout), Normal (medium latency, medium change of audio dropout), and The Setup Dialog DAW (lower latency, more chance of audio dropout).
FireWire Setting
Determines if the
Note that when the PCM96 Surround is in Control Only mode, you may be prompted to “Select the PCM96 Surround you would like to connect to.” When this happens, select the channel you’d like to apply the
Cancel
Click to cancel any changes you’ve made and return to the PCM96
Surround Control Panel.
Accept
Click to save any changes you’ve made and return to the PCM96 Surround Control Panel.
Streaming
When the PCM96 Surround is used as a streaming
• | Single Stereo | • Single Two In Four Out |
• | Two Stereo | • Single Four In Four Out |
• | Dual Mono | • Single Two In Five Out |
• | Four Mono | • Single Five In Five Out |
• Two Mono and One | • Single Six In Six Out | |
| Stereo |
|
23