Lexicon PCM96 The Rear Panel - Digital and Analog Model, Power Jack, Ethernet Inputs, Midi In

The Rear Panel - Digital and Analog

Model

1 2 3 4 5

ANALOG I/O

6 7

1. Power Jack

Standard 3-pin IEC power connector. 100-240V, 50-60Hz automatic switching to correct voltage range.

2. DB25 6-CHANNEL DIGITAL AES I/O

This D25 connector carries six analog inputs and outputs.

3. Ethernet Inputs

These RJ-45 connections are used to network PCM96 Surround devices and control them via Ethernet.

4.MIDI IN

Receives MIDI information from other MIDI equipment such as master keyboard controllers, MIDI foot controllers, sequencers and synthesizers.

MIDI THRU

Passes any MIDI data received without change.

MIDI OUT

Transmits MIDI data to other equipment.

5.DB25 6-channel Analog IN/OUT

These D25 connectors each carry six analog inputs and outputs.

6. FireWireTM Ports

Connect FireWireTM cables here. Either port can be used, with the other act- ing as Thru.

7. WORD CLOCK INPUT

This connection allows the PCM96 Surround to lock to a master system clock. It is not terminated. For best results we recommend using “T” con- nectors when setting up a BNC Word Clock network and terminating the end of of this network with a 75 ohm BNC terminator.

7