Feedback
This controls the amount of echo output that is fed back to the input of the echo buffer.
The actual feedback level is modified by the Master Echo Feedback param- eter, if present. The master value is a percentage
Feedback Diffusion
Feedback Diffusion is similar to Input Diffusion, except that it is applied to a delayed signal that is being added back into the input.
Feedback Level
This parameter determines the feedback level for a particular voice. It is con- trolled independently of the voice’s output level.
Feedback Pan
Routes the
Frequency
This parameter lets you set the cutoff frequency of the multimode filter. The audible effect of this is determined by the Type parameter.
Front Early Level
This parameter acts as a master control for any early signals going to the out- put channels. Early signals include echoes, reflections, and the room reflec- tion patterns.
Infinite
This parameter captures the reverb tail as an infinite loop. This may be use- ful in music, where a note or chord can be extended. It is also useful in post- production for creating ambience backgrounds.
Input Level
Input Level controls the amount of signal admitted into the process from a single input channel.
Input Pan
Routes the signal from an input channel into the algorithm in such a man- ner as to alter its apparent location.
Level
This parameter acts as a master control for reverb signals going to the output channels. It is used for all reverbs.
LFO Rate
Set the speed of an LFO in Hz.
LFO Waveform Type
Set the shape of the wave the LFO will follow.
Lowest Shift Freq
45
