Zoom 100 quick start Software Installation, Install Ulead Photo Express

Software Installation

Please note that you must install the software BEFORE you connect the camera to the USB port of your computer.

Step 1: Install Ulead Photo Express

1.Insert the software CD into the CD-ROM drive of your computer.

2.Follow the on-screen instructions to install the software. The software will install automatically.

Note: If the software does not setup automatically, go to the Taskbar and click Start, then click on Run, select Browse and choose SETUP.EXE on the software CD, then click OK to install.

3.The Ulead Photo Express software is loaded when you see the software icon on the screen.

Important: For more information on how to use the software, please refer to the folder named “Manual” on the CD.

Step 2 : Install Digital Camera Driver-CamMaestro

In order to use the camera and connect it to your PC, you must install the driver named CamMaestro AFTER you have installed the Photo Express software in step 1.

1.Follow the on-screen instructions to install the software. The software will install automatically.

Note: If the software does not setup automatically, go to the Taskbar and click Start, then click on Run, select Browse and choose SETUP.EXE on the software CD, then click OK to install.

2.When the setup is finished, you must restart your computer before using the camera. Shut down your PC using the appropriate procedure for your operating system.