Safety Precautions
Please observe the following safety tips and precautions to ensure
Power requirements
The 1010 is powered by the supplied AC adapter . To prevent malfunction and safety hazards, Do not use any other kind of AC adapter.
When using the 1010 in an area with a different line voltage, please consult your local ZOOM distributor about acquiring a proper AC adapter.
Environment
Avoid using your 1010 in environments where it will be exposed to:
•Extreme temperature
•High humidity or moisture
•Excessive dust or sand
•Excessive vibration or shock
Handling
Since the 1010 is a precision electronic device, avoid applying excessive force to the switches and buttons. Also take care not to drop the unit, and do not subject it to shock or excessive pressure.
Alterations
Never open the case of the 1010 or attempt to modify the product in any way since this can result in damage to the unit.
Connecting cables to input and output jacks
You should always turn off the power to the 1010 and all other equipment before connecting or disconnecting any cables. Also make sure to disconnect all cables and the AC adapter before moving the 1010.
Usage Precautions
Electrical interference
The 1010 uses digital circuitry that may cause interference and noise if placed too close to other electrical equipment, such as TV sets and radio receivers. If such problems occur, move the 1010 further away from the affected equipment. Also, when fluorescent lights or devices with
Cleaning
Use a soft, dry cloth to clean the 1010. If necessary, slightly moisten the cloth. Do not use abrasive cleanser, wax, or solvents (such as paint thinner or cleaning alcohol), since these may dull the finish or damage the surface.
Please keep this manual in a convenient place for future reference.ZOOM CORPORATION
NOAH Bldg.,
Printed in Japan