Zoom 56K quick start Windows NT 4.0 Users, Windows 95/98/Me/2000/XP Users

56K External Modem

QUICK START

This Quick Start describes external modem installation for personal computers using Windows 95, 98, Me, 2000, XP, and NT 4.0. Your modem also works with almost any computer or terminal with a serial (RS-232) port, including most Windows 3.x, Macintosh, and Linux computers. You should consult your full-length manual if you have one of these other systems. The manual is located on the CD.

Please make sure you have the following items: modem, telephone cord, power supply, and installation and communications software on diskette(s) or CD-ROM. In some countries, you may also need a country-specific telephone adapter to attach your modem to the telephone wall jack.

Depending on your modem model, your package may or may not include a faxmodem-to-computer serial cable. If it doesn’t, make sure that you have a serial cable that mates with the connector on your particular computer.

Important – If your computer already has an internal PCI modem installed

You should remove the modem and its drivers now. Your old modem may interfere with the installation of your new modem. Please refer to page 5 now.

Windows NT 4.0 Users:

Note: Not all models are compatible with NT. See your box for operating systems supported.

You need to install your faxmodem hardware before running your setup software. Skip to page 2, Connecting the Faxmodem.

Windows 95/98/Me/2000/XP Users:

You need to run your setup software before installing your modem hardware. Continue below.

Insert the enclosed CD in your computer’s CD-ROM drive and wait for it to auto-run.

If the CD does not auto-run: Right-clickMy Computer and then click Explore. In the left panel click on the CD icon of the drive that has your modem CD in it. In the right panel, double-clickSetup or Setup.exe.