Zoom ADSL X3 Appendix B, Front and Back Panels

Appendix B

Front and Back Panels

The front panel of the X3 looks like this:

The following table describes each light on the front panel.

Light	Description
LAN	Lights when the ETHERNET jack of the X3 is plugged into
	the Ethernet port of a powered-up device. Blinks when data
	is sent.
LINK	Blinks when the X3 is performing its startup sequence. Stays
	on solid when the unit has synched up with its ADSL
	connection.
	Note: If the light fails to switch from blinking to steady after a
	minute or two, check with your ADSL provider that the ADSL
	connection is activated, or refer to Appendix D:
	Troubleshooting on page 55.
PWR	Lights when the X3 is plugged into a power source.

46 ADSL X3 User’s Guide