The modem’s ETHERNET connector is at the back of the modem.
3 Plug the included X3 power cube into a power strip or wall outlet, and then into the modem’s power (PWR) jack.
Important!
Only use the power cube shipped with the X3. Other power cubes may damage your hardware.
4 Turn the modem on by using the ON/OFF button at the back of the modem.
The PWR light on the front panel of the modem should become steady on, and the LINK light should blink once. If the PWR light does not turn on, make sure there is power at the wall outlet or power strip where you plugged in the power cube and that you have pushed the X3’s ON/OFF button to turn it on.
5 Turn the computer on.
Chapter 1: Installation Instructions | 9 |