Installing the X4

Installing the X4 involves four steps: Installing the Software, Installing the Hardware, Configuring Your Web Browser, and Establishing Communication.

Step 1: Installing the Software

Important!

This section is for Windows computers only. If you are using a Macintosh or Linux computer, or your are connecting the X4 directly to a hub or network device, skip this section and begin with the next one, Installing the Hardware on page 9.

Windows computer users MUST install the software BEFORE installing the hardware.

If you intend to use the X4’s USB option, you must remove any existing USB modem drivers on your Windows computer before installing this software. On the desktop, click the Start button, and then—depending on your operating system—either click Control Panel, or click Settings and then Control Panel. In the Control Panel, double-click Add/Remove Programs. On the Add/Remove Program Properties dialog box, select the USB modem you are removing on the Install/Uninstall tab, click Remove, and then click OK.

1 Ensure that your computer is on.

2 Insert the supplied CD into the CD-ROM drive of your computer. The CD should start automatically and the Language Selection screen should appear. (If the CD does not start automatically, on the desktop, click the Start button, click Run, and then type D:\setup.exe, where D is the letter of your CD-ROM drive.)

3 Select your language. The Main Menu screen opens.

Chapter 1: Installation Instructions

7