![](/images/new-backgrounds/1118309/11830947x1.webp)
no longer want to use a profile, you can remove it by clicking the Delete button.
Tip: You can also select a profile by
Transmit
For most networks, the factory default Fully Auto will prove the most efficient. This setting allows the USB Client to adjust and operate at the maximum possible data rate. When the communication quality drops below a certain level, the Client automatically switches to a lower data rate (transmissions at lower data speeds are usually more reliable). When the communications quality improves again, the unit gradually increases the data rate until it has achieved the highest available transmit rate.
To activate WEP, check the WEP Enabled check box that appears under the Profile field.
An Encryption dialog box displays.
24 | ZoomAir USB Client Installation Guide & Reference Manual |