ZyXEL Communications 100 2.2.2 Connecting the PL-100to a Computer, PWR, LINK, ETHN

PL-100 User’s Guide

2.2.2 Connecting the PL-100 to a Computer

For all the computers you wish to be networked, they must each be connected properly to a PL-100 Ethernet adapter. The figure below shows how to connect the PL-100 to each computer.

Follow the steps below to connect the PL-100 to your computer.

1Connect an Ethernet cable to the port on the PL-100.

2Connect the other end of this Ethernet cable to the Ethernet port of your computer.

3Plug the PL-100 into a wall socket that is near your computer.

4Confirm that the PWR, LINK and ETHN LEDs on the PL-100 are on.

Figure 2 Connecting the PL-100 to a Computer

PL-100

1

3

2

Chapter 2 Connecting the PL-100 23