ZyXEL Communications 100 2.2.3 LED Status

PL-100 User’s Guide

2.2.3 LED Status

The LEDs of the PL-100 show the current connection status.

Figure 3 PL-100 Top View With LED Lights

Table 1 LED Status of the PL-100 After Connection

LABEL	STATUS	DESCRIPTION
PWR	ON	The PL-100 is on and receiving power.
	OFF	The PL-100 is not receiving power.
LINK	ON	The Powerline port detects another powerline device.
	Flashing	The Powerline port is transmitting.
	OFF	The Powerline port is not detecting another powerline device.
ETHN	ON	The Ethernet port is on and ready.
	Flashing	The Ethernet port is transmitting.
	OFF	Devices on the Ethernet port are not connected or not on.

Please refer to the troubleshooting guide for additional help if needed. Section Chapter 5 on page 37 for help.

24 Chapter 2 Connecting the PL-100