ZyXEL Communications 100 Using the Configuration Utility, 4.1 Configuration Utility Main Screen, Main, Start, PL-100, Programs, Zyxel Software, Configuration Utility

PL-100 User’s Guide

CHAPTER 4

Using the Configuration Utility

After the hardware and software are installed successfully, you can set up and adjust your network. In order to run the configuration utility, double-click the utility icon. To do this, click Start, Programs and Zyxel Software and click on PL-100 Configuration Utility. Figure 10 on page 29 below shows the main screen of the configuration utility.

4.1 Configuration Utility Main Screen

The Main screen essentially provides a list of all powerline devices logically connected to the computer where the utility is running.

Figure 10 PL-100 Configuration Utility Main

Chapter 4 Using the Configuration Utility 29