ZyXEL G-220 v2 User’s Guide

1.6.1 Site Survey

After you install the ZyXEL Utility and then insert the ZyXEL G-220 v2, follow the steps below to connect to a network using the Site Survey screen.

1Make sure a wireless network is available and within range.

2Open the ZyXEL Utility and click the Site Survey tab to open the screen as shown next.

3Click Scan to search for available wireless networks.

Figure 5 ZyXEL Utility: Site Survey

4To join a network, either click an SSID in the table and then click Connect or double- click an SSID.

5If the wireless security is activated for the selected wireless network, the Security Setting screen displays. This screen varies according to the network’s encryption method. Configure the same security settings as the associated network.

Note: If the selected network is unavailable or the security settings are not correct, the ZyXEL G-220 v2 cannot connect to a network.

Chapter 1 Getting Started

23