ZyXEL Communications 1 Access Point Mode Setup Example, Configuring the Computer on Which You Install the ZyXEL G- 220, APPENDIX B, Properties

ZyXEL G-220 v2 User’s Guide

APPENDIX B

Access Point Mode Setup Example

This example uses the network sharing feature in Windows 2000 to bridge the wired and wireless network when you set the ZyXEL G-220 v2 in access point (AP) mode.

Refer to Chapter 4, “Access Point Mode Configuration,” on page 53 for setup methods and requirements.

Steps may vary depending on your Windows version. You may need to install additional software in Windows 98 Second Edition and Windows ME.

Configuring the Computer on Which You Install the ZyXEL G- 220 v2

1Refer to Section 1.7.1 “Change ZyXEL G-220 v2 Mode” on page 25 to set the ZyXEL G- 220 v2 to operate in AP mode.

2Click Start, Settings, Network and Dial-up Connections (or click Start, Settings, Control Panel and double-clickNetwork and Dial-up Connections).

Figure 35 Windows 2000: Start

3Right-click on the icon for your wired Ethernet adapter and click Properties.

Appendix B Access Point Mode Setup Example 67