ZyXEL M-202 User’s Guide

1.7.1 Site Survey

After you install the ZyXEL Utility and then insert the ZyXEL M-202, follow the steps below to connect to a network using the Site Survey screen.

1Make sure a wireless network is available and within range.

2Open the ZyXEL Utility and click the Site Survey tab to open the screen as shown next.

3Click Scan to search for available wireless networks.

Figure 5 ZyXEL Utility: Site Survey

4To join a network, either click an SSID in the table and then click Connect or double- click an SSID.

5If the wireless security is activated for the selected wireless network, the Security Settings screen displays. This screen varies according to the network’s encryption method. Configure the same security settings as the associated network.

Note: If the selected network is unavailable or security settings are not correct, the ZyXEL M-202 will be disconnected.

Figure 6 ZyXEL Utility: Security Settings

Chapter 1 Getting Started

23