ZyXEL Communications 202 WEP, WPA, WEP, WPA2, Save, Back, Exit, Ad-Hoc, WPA-PSK, DISABLE, Profile, WPA2-PSK, Infrastructure

ZyXEL M-202 User’s Guide

3If you select Infrastructure network type in the first screen, select WEP, WPA, WPA2, WPA-PSK, WPA2-PSKor 802.1x from the drop-down list box to enable data encryption. If you select Ad-Hocnetwork type in the first screen, you can only use WEP encryption method. Otherwise, select DISABLE to allow the ZyXEL M-202 to communicate with the access points or other peer wireless computers without any data encryption and skip to step 5.

Figure 24 Profile: Security Setting: Encryption Type

4The screen varies depending on the encryption method you select in the previous screen. The settings must be exactly the same on the APs or other peer wireless computers as they are on the ZyXEL M-202. Refer to Section 3.2.2 on page 38 for detailed information on wireless security configuration.

Figure 25 Profile: Security Setting

5This read-only screen shows a summary of the new profile settings. Verify that the settings are correct. Click Save to save and go to the next screen. Click Back to return to the previous screen. Otherwise, click Exit to go back to the Profile screen without saving.

Chapter 3 ZyXEL Utility Configuration 47