ZyXEL Communications 202 Next, Ad-Hoc, Infrastructure

ZyXEL M-202 User’s Guide

Table 15	Profile: Add New Profile (continued)
LABEL		DESCRIPTION
,		denotes that the wireless device is in infrastructure mode and the wireless
,		security is activated.
		denotes that the wireless device is in infrastructure mode but the wireless
or		security is deactivated.
		denotes that the wireless device is in Ad-Hoc mode and the wireless
		security is activated.
		denotes that the wireless device is in Ad-Hoc mode but the wireless security
		is deactivated.
SSID		This field displays the SSID (Service Set IDentifier) of each wireless device.
Scan		Click Scan to search for available wireless devices within transmission range.
Select		Select an available wireless device in the table and click Select to add it to this
		profile.
		Whenever you activate this profile, the ZyXEL M-202 associates to the selected
		wireless network only.

2If you select the Infrastructure network type in the previous screen, skip to step 3. If you select the Ad-Hocnetwork type in the previous screen, a screen displays as follows. Select a channel number and click Next to continue.

Figure 23 Profile: Wireless Setting: Select a Channel

The following table describes the labels in this screen.

Table 16 Profile: Wireless Setting: Select a Channel

LABEL	DESCRIPTION
Wireless Setting
Channel	Select a channel number from the drop-down list box. To associate to an ad-hoc
	network, you must use the same channel as the peer computer.
Back	Click Back to return to the Add New Profile screen.
Next	Click Next to confirm your selection and advance to the Encryption Type screen.
Exit	Click Exit to discard changes and return to the Add New Profile screen.

46 Chapter 3 ZyXEL Utility Configuration