2.Power on your computer.
3.If you hear an alert sound skip to step 5. If not continue.
4.Use a PCMCIA utility to set your COM port and IRQ information. A PCMCIA utility should have been included with your computer. If not contact your dealer.
5.Install the FAX/MODEM application program that came with your Comet.
6.Connect the FAX/MODEM interface cable and connect the
Windows NT 4.0
1.Insert the Comet into a free PCMCIA slot.
2.Power on your computer and start Windows.
3.Double click the Modem Icon in the Control Panel dialogue box.
4.From the Install New Modem dialogue box, ckick the Next button.
5.Click the Change button to change the modem type.
6.Click the Have Disk... button.
7.Insert the INF file disk into the floppy drive.
8.Enter the path A:\ and click the OK button.
9.Click OK to accept the modem type and then click finish.
4 Installation
