Prestige 630-C Series ADSL USB Modem

 

Table 6-1 WAN Configuration

 

 

LABEL

DESCRIPTION

 

 

Disconnect Timeout

Enter a time in seconds after which the PPP connection will disconnect if the line

 

is idle (max: 32767 seconds).

Authentication

This field sets the authentication protocol used for outgoing calls. Options for this

 

field are:

 

Auto – Your Prestige will accept either CHAP or PAP when requested by this

 

remote node. PAP mode will run first, and then CHAP.

 

CHAP – accept CHAP only.

 

PAP – accept PAP only.

 

 

Automatic Reconnect

Select this check box to maintain PPP connection. If the ISP shuts down the

 

PPP connection, it will automatically reconnect PPP session.

 

 

DHCP

 

 

 

DHCP Client Enable

Select Enabled or Disabled to change the status of the DHCP client.

 

 

Host Name

If your ISP provided a host name, enter it here.

 

 

Submit

Click this button to submit the changes.

 

 

Reset

Click this button to reset all values to their defaults.

 

 

Table 6-2 WAN Configuration Options

LABEL

Bridge Mode

Router Mode

Router Mode

Router Mode

 

(PPPoA/PPPoE)

(Dynamic IP)

(Static IP)

 

 

 

 

 

 

 

IP address

N/A

Automatically

Automatically

Provided by ISP

 

assigned by ISP

assigned by ISP

 

 

 

 

 

 

 

 

 

Subnet Mask

N/A

Automatically

Automatically

Provided by ISP

 

assigned by ISP

assigned by ISP

 

 

 

 

 

 

 

 

 

6-4

Basic Configuration