ZyXEL Communications 660H Series 5.6 Configuring Source and Destination Addresses

	Prestige 660H Series Compact Guide
	Table 5 Creating/Editing A Firewall Rule
LABEL	DESCRIPTION
Source Address	Click SrcAdd to add a new address, SrcEdit to edit an existing one
	or SrcDelete to delete one. Please see the next section for more
	information on adding and editing source addresses.
Destination	Click DestAdd to add a new address, DestEdit to edit an existing
Address	one or DestDelete to delete one. Please see the following section
	on adding and editing destination addresses.
Services
Available/	Highlight a service from the Available Services box on the left, then
Selected	click >> to add it to the Selected Services box on the right. To
Services	remove a service, highlight it in the Selected Services box on the
	right, then click <<.
Edit Available	Click this button to go to the list of available services.
Service
Action for	Should packets that match this rule be blocked or forwarded? Make
Matched	your choice from the drop down list box. Note that Block means the
Packets	firewall silently discards the packet.
Log	This field determines if a log is created for packets that match the
	rule, don’t match the rule, both or no log is created.
Alert	Check the Alert check box to determine that this rule generates an
	alert when the rule is matched.
Delete	Click Delete to remove this rule.

5.6 Configuring Source and Destination Addresses

To add a new source or destination address, click SrcAdd or DestAdd from the previous screen. To edit an existing source or destination address, select it from the box and click SrcEdit or DestEdit from the previous screen. Either action displays the following screen.

27