Miele G 7804 Frequently asked questions, What if …, Possible fault, water in the wash

Frequently asked questions

What if …	Possible fault	Fix
water in the wash	This machine has a	– Remove the cause of
cabinet is not heated,	resettable heater limiter	the fault.
the program sequence	which will switch off the	– Remove the service
lasts too long and a fault	heater in case of	panel (see "Electrical
code appears in the	over-heating. This could	connection").
display: "F01 - F02"?	be caused if large articles	– Press the reset button
	cover the heating	on the right side of the
	elements or if the filters in
		temperature sensor.
	the wash cabinet are
		If this switch trips
	blocked.
		repeatedly, contact the
		Miele Technical Service
		Department before
		further use.
a fault message is		– Turn the program
caused by a possible		selector to "Stop" f
malfunction?		(the fault code goes
		out).
		– Press the "On/Off"
		button to turn the
		machine off.
		– Turn the machine on
		again and reselect the
		program.
		If the fault code "F..."
		appears in the display,
		or if you experience
		further difficulty, contact
		the Miele Technical
		Service Department.

36