Miele G 7804 operating instructions Cleaning the non-returnvalve and drain pump, Machine care

Machine care

Cleaning the non-return valve and drain pump

If water has not been pumped away at the end of a program, the drain pump or the non-return valve may be blocked.

^Turn off the washer.

^Remove the filter combination from the wash cabinet.

^Tilt the locking clamp to the side.

^Pull out the non-return valve and rinse under running water.

The drain pump is located beneath the non-return valve (see arrow).

^Before returning the non-return valve, check that the drain pump is not blocked. Spin the propeller several times in both directions to check for obstructions.

^Carefully refit the non-return valve and secure it with the locking clamp. Refit and lock the filter in place.

For safety reasons the load should be washed again.

33