Installation
Please refer to the installation diagram supplied with the machine.
,Furniture and fittings installed near the machine must be of a commercial standard (able to withstand the effects of steam).
Installation options
–
–Undercounter
The machine can be installed under a continuous counter or sink drain. The recess must be at least 60 cm wide, 60 cm deep and 82 cm high.
Positioning and securing the machine
To ensure stability, the machine must be aligned and screwed to the counter.
^Open the door.
^Secure the machine to the front edge of the worktop using the screws to the left and right of the front trim.
^When not mounted undercounter, floor mounting brackets must be used.
Do not use silicone sealant to seal the gaps between the machine and any neighboring units. This will hinder ventilation to the circulation pump.
Steam Deflector (protects the countertop)
Depending on the requirements for an undercounter installation, a steam deflector can be ordered from the Miele Technical Service Department.
The underside of the countertop is protected from steam damage by a stainless steel plate.
41