Programming special functions
3. Setting the buzzer
A buzzer can be set to signal one or both of the following:
–End of program = continuous buzzer
–Error = rhythmic buzz
^Turn the program selector to "STOP" f.
^Turn the machine off.
^Press and hold "Display" and "Start". At the same time, turn the lab washer on with the "On/Off" button. The displays shows the current program status "P...".
The "Fill/Drain" indicator illuminates.
^Press the "Drying" button once. "E01" appears in the display.
^Turn the program selector clockwise to the
The display shows a number between "100" and "103". "100" = Buzzer is turned off "101" = End of program
(factory setting) "102" = Error
"103" = All functions
(End of program, Error).
^Press and hold "Display" until the desired value appears in the display.
^Press the "Start" button. "SP" appears in the display.
^Press the "Start" button again. The change has been saved.
^Please note the changed setting:
To turn the buzzer off
^Turn the program selector to "STOP" f.
30