ZyXEL Communications B-400 manual Physical Details

ZyAIR B-400 Quick Installation Guide

Physical Details

Rear Panel

INIT Button
LAN Cable
Selection Switch		LAN Connection
		Power Input
INIT Button	“INIT” means “Initialize”. Pressing the button will
	reboot the device and restore the settings to the
	factory default settings.

LAN Cable

Selection Switch

X:Crossover: the RJ-45 port Tx and Rx lines are reversed. Use this setting when using a straight cable connected to a PC or other Ethernet device. It is also the factory default setting.

II:Straight: Straight: the RJ-45 port Tx and Rx lines are normal. Use this setting when using a straight cable connected to an Ethernet device, such as an Ethernet hub/switch.

—6 —