Chapter 9 Configuring the DMA
Figure 36 OPTION > Settings for Ease of Use
The following table describes the fields in this menu.
Table 19 OPTION > Settings for Ease of Use
LABEL | DESCRIPTION |
Connect to last | When the DMA starts up, this option has it automatically connect to the media |
accessed server | server that you last used. |
automatically | A check mark appears next to the option if it is selected. |
|
|
Connect to single | When the DMA starts up, this option has it automatically connect to the media |
server/USB | server or USB device that you last used. |
automatically | A check mark appears next to the option if it is selected. |
|
|
Resume last | If you were playing a file when you turned off the DMA, this option has the DMA |
screen from | automatically continue playback from where you left off when you turn the DMA |
standby | back on. |
| A check mark appears next to the option if it is selected. |
|
|
Sound effect | Set how loud you want the DMA to beep when you press buttons on the remote |
| control. |
|
|
OK | Select this to save your changes back to the DMA. |
|
|
CANCEL | Select this to exit this screen without saving your changes. |
|
|
9.13 Reset Settings
Use this menu to set the DMA back to the factory default settings.
You will lose all of your changes when you reset to the default settings.
Select OPTION > Reset Settings to open the following menu.
66 |
| |
| ||
|
|
|