Chapter 9 Configuring the DMA
Figure 38 OPTION > Software Update
The following table describes the fields in this menu.
Table 21 OPTION > Software Update
LABEL | DESCRIPTION |
Update over | Select this option and follow the |
Internet | and download new software from a server. The DMA must be connected to the |
| Internet in order to do this. |
| A check mark appears next to the option if it is selected. |
|
|
Update from USB | Select this option and follow the |
| new software from a USB stick. You must first download the software file, unzip it |
| and put it on a USB stick. Find software at www.zyxel.com in a file that (usually) |
| uses the system model name with a .bin extension, for example, |
| A check mark appears next to the option if it is selected. |
|
|
OK | Select this to save your changes back to the DMA. |
|
|
CANCEL | Select this to exit this screen without saving your changes. |
|
|
Do not turn off the DMA while software upload is in progress!
The upload process may take up to two minutes. After a successful upload, the system will reboot. See Section 9.15 on page 68 for how to check the software version to know if the new software upload was successful.
9.15 Device Information
Use this menu to display information about the DMA.
Select OPTION > Device Information to open the following menu.
68 |
| |
| ||
|
|
|