ZyXEL
When you configure the
4.3.1.1 WEP Encryption
Figure 22 Security Setting: WEP
The following table describes the labels in this screen.
Table 8 Security Setting: WEP
LABEL | DESCRIPTION |
|
|
Security Settings |
|
|
|
WEP | Select 64 Bits, 128 Bits or 152 Bits to activate WEP encryption and then fill in the |
| related fields. |
Encryption Type | Select an authentication method. Choices are Open, Shared and Auto Switch. |
| Refer to Section 3.2.1.1.2 on page 33 for more information. |
|
|
Pass Phrase | Enter a passphrase of up to 63 |
| the passphrase, the |
| and displays it in the key field below. Refer to Section 3.2.1.1.1 on page 32 for |
| more information. |
Transmit Key | Select a default WEP key to use for data encryption. The key displays in the field |
| below. |
Chapter 4 Wireless Configuration | 39 |