ZyAIR G-160 User’s Guide

 

 

Table 2-7 802.1X Configuration

 

 

 

 

LABEL

 

DESCRIPTION

 

 

 

 

Protocol

Select an authentication protocol (EAP-TLS, MSCHAP V2 over PEAP or LEAP) in the

 

text box. The options vary based on what you select in the Privacy Mode field in the

 

Privacy screen.

Password

This field is only available when you select MSCHAP V2 over PEAP or LEAP in the

 

Protocol field.

 

If you want the ZyAIR Utility to prompt you to enter the password each time the ZyAIR

 

tries to connect to a network, select prompt for password.

 

If you want to enter the password now, select use the following user name and

 

password and configure the following fields.

Login Name

Enter a user name.

 

This is the user name that you or an administrator set up on the RADIUS server.

 

 

 

 

Password

Enter the password associated with the user name above.

 

 

 

 

Unmask

Note that as you type a passphrase, the screen displays an asterisk (*) for each

 

character you type. Select this check box if you want to view the passphrase you

 

entered.

 

 

Personal

This field is only available when you select EAP-TLSin the Protocol field.

Certificate

 

 

 

 

You must first have a wired connection to a network and obtain

 

 

 

 

 

 

the certificate(s) from a certificate authority (CA). Consult your

 

 

 

network administrator for more information.

 

 

 

User Name

Enter the user name that is assigned to the certificate.

 

 

View

Click View to check the certificate information of the selected certificate.

 

 

Browse

Click Browse to display the Select Certificate screen. Select a certificate and click

 

OK or click View to check the certificate information of the selected certificate.

Server Certificate

This field is only available when you select EAP-TLSin the Protocol field.

 

 

Validate

Select the check box to check the certificate of the authentication server.

 

 

OK

Click OK to save the changes and close the screen.

 

 

Cancel

Click Cancel to leave this screen without saving.

 

 

 

 

2.4.3 WPA-PSK Configuration

In the Privacy screen, select WPA in the Privacy Mode field, select None in the Authentication Mode field and click Configure to display the PSK Configuration screen as shown next.

2-24

Using the ZyAIR Utility