ZyXEL G-260 User’s Guide

3.2.2.2 WPA/WPA2

Figure 14 Security Settings: WPA/WPA2

The following table describes the labels in this screen.

Table 7 Security Settings: WPA/WPA2

LABEL

DESCRIPTION

 

 

Authentication

Select an authentication method from the drop down list. Options are TLS and

Type

PEAP.

Login Name

Enter a user name.

 

This is the user name that you or an administrator set up on a WPA/WPA2 server.

 

 

Certificate

This field is only available when you select TLS in the Authentication Type field.

 

Specify the location and name of a certificate in the Certificate field or click

 

Browse to locate it.

 

Note: You must first have a wired connection to a network and

 

obtain the certificate(s) from a certificate authority (CA).

 

Consult your network administrator for more information.

 

 

Password

This field is not available when you select TLS in the Authentication Type field.

 

Enter the password associated with the user name above.

 

 

Validate Server

Select the check box to check the certificate of the authentication server.

Certificate

 

PEAP Inner EAP

This field is only available when you select PEAP in the Authentication Type

 

field.

 

Use the drop-down list box to select a PEAP protocol. Options are MD5

 

CHALLENGE, TOKEN CARD and MS CHAP v2.

Back

Click to go back to the Encryption Type screen.

 

 

Next

Click Next to confirm your selections and go to the Save screen. Section 3.2.3 on

 

page 41

Exit

Click Exit to discard changes and return to the Site Survey screen.

 

 

39

Chapter 3 ZyXEL Utility Configuration