ZyXEL G-260 User’s Guide

2If you select the Infrastructure network type in the previous screen, skip to step 3. If you select the Ad-Hocnetwork type in the previous screen, a screen displays as follows. Select a channel number and wireless LAN mode and click Next to continue.

Figure 20 Profile: Wireless Setting: Select a Channel

The following table describes the labels in this screen.

Table 13 Profile: Wireless Setting: Select a Channel

LABEL

DESCRIPTION

 

 

Wireless Setting

 

 

 

Channel

Select a channel number from the drop-down list box. To associate to an ad-hoc

 

network, you must use the same channel as the peer computer.

Back

Click Back to return to the Add New Profile screen.

 

 

Next

Click Next to confirm your selection and advance to the Encryption Type screen.

 

 

Exit

Click Exit to discard changes and return to the Add New Profile screen.

 

 

3If you select Infrastructure network type in the first screen, select WEP, WPA-PSK,WPA2-PSK, WPA or WPA2 from the drop-down list box to enable data encryption. If you select Ad-Hocnetwork type in the first screen, you can only use WEP encryption method. Otherwise, select Disable to allow the ZyXEL G-260 to communicate with the access points or other peer wireless computers without any data encryption and skip to step 5.

45

Chapter 3 ZyXEL Utility Configuration