ZyAIR G-3000 Quick Start Guide

PROBLEM

CORRECTIVE ACTION

 

 

The SYS LED is

Unplug the power adaptor and plug it in again. If the error persists, you may have a

off.

hardware problem. In this case, you should contact your vendor.

 

 

I cannot ping any

If the ETHN LED is off, check the cables between the ZyAIR and your computer or

computer on the

hub.

wireless LAN.

Verify that the IP address and the subnet mask of the ZyAIR and the computers are

 

 

in the same range.

 

 

21