Chapter 18 The Remote Management Screens
User’s Guide
206
18.3 Telnet
Click TOOLS > Remote Management > Telnet to control Telnet access to your
WiMAX Modem.

Figure 88 TOOLS > Remote Management > Telnet

The following table describes the labels in this screen.
18.4 FTP
Click TOOLS > Remote Management > FTP to control FTP access to your
WiMAX Modem.

Figure 89 TOOLS > Remote Management > FTP

Table 72 TOOLS > Remote Management > Telnet

LABEL DESCRIPTION
Server Port Enter the port number this service can use to access the WiMAX
Modem. The computer must use the same port number.
Server Access Select the interface(s) through which a computer may access the
WiMAX Modem using this service.
Secured Client
IP Address Select All to allow any computer to access the WiMAX Modem using this
service.
Select Selected to only allow the computer with the IP address that
you specify to access the WiMAX Modem using this service.
Apply Click to save your changes.
Reset Click to restore your previously saved settings.