Chapter 19 QoS
User’s Guide 217
19.3.1 Class Configuration
Click the Create New Class button or the edit icon in the Class Setup screen to
configure a classifier.

Figure 98 QoS > Class Setup > Class Configuration

The following table describes the labels in this screen.

Table 81 QoS Class Setup

LABEL DESCRIPTION
Class Configuration
Active Select this to make a class active.
Index Enter an index number for the class. Similar classes are processed in
order of index number, from lowest to highest.
Name Enter a descriptive name of up to 20 printable English keyboard
characters, including spaces.
Interface Select an interface to which the class will apply:
•From WAN - The class is applied to all packets incoming from the
WAN (Wide Area Network).
•From LAN - The class is applied to all packets outgoing from the
LAN (Local Area Network).
Protocol Select a protocol. Options are: TCP, UDP and User Defined.
Apply Click this button to save your changes back to the WiMAX Modem.
Cancel Click this button to begin configuring this screen afresh.