Chapter 9 The VPN Transport Screens
User’s Guide 99

9.1.3 Before You Begin

Before you start configuring your WiMAX Modem to use VPN transport, ensure that
you have the following from the service provider:
The IP address or domain name of the service provider’s edge router.
Virtual circuit (VC) labels for each Ethernet Pseudowire you want to create.
Also make sure that you know the VLAN IDs (Virtual LAN IDentifiers) of the
VLANs on your LAN.
9.2 General
Click ADVANCED > VPN Transport to turn VPN transport on or off and to set the
VPN transport endpoint (your service provider’s router).

Figure 35 ADVANCED > VPN Transport > General

The following table describes the labels in this screen.

Table 24 ADVANCED > VPN Transport > General

LABEL DESCRIPTION
L2/L3 VPN Transport General Setup
Tran spo rt L 2/L 3
VPN... Select this to turn the VPN transport feature on. Deselect it to turn the
VPN transport feature off.
Remote GRE
Tunnel End Enter the domain name or IP address of your service provider’s router.
Apply Click to save your changes.
Reset Click to restore your previously saved settings.