Chapter 11 Maintenance

The NWA automatically restarts in this time causing a temporary network disconnect. In some operating systems, you may see the following icon on your desktop.

Figure 66 Network Temporarily Disconnected

If you uploaded the default configuration file you may need to change the IP address of your computer to be in the same subnet as that of the default NWA IP address (192.168.1.2). See Appendix A on page 123 for details on how to set up your computer’s IP address.

11.8.3 Back to Factory Defaults

Pressing the Reset button in this section clears all user-entered configuration information and returns the NWA to its factory defaults as shown on the screen. The following screen will appear.

Figure 67 Reset Message

You can also press the RESET button to reset your NWA to its factory default settings. Refer to Section 2.3 on page 20 for more information.

11.9 Restart Screen

Use this screen to reboot the NWA without turning the power off.

Click Maintenance > Restart. The following screen displays.

Figure 68 Maintenance > Restart

Click Restart to have the NWA reboot. This does not affect the NWA's configuration.

 

117

NWA1120 Series User’s Guide