Chapter 6 Wireless LAN

Table 11 Wireless LAN > Wireless Settings: Root AP (continued)

LABEL DESCRIPTION

Repeater Settings

The repeater function allows the NWA in root AP or repeater mode to set up a wireless connection between it and another NWA in root AP or repeater mode.

Note: Repeater security is independent of the security settings between the NWA and any wireless clients.

Local MAC

Local MAC Address is the MAC address of your NWA.

Address

 

 

 

Repeater SSID

Select the SSID profile you want to use for repeater connections.

Profile

 

 

Note: You can only configure None, WPA-PSKor WPA2-PSKsecurity mode for the SSID

 

used by a repeater connection.

 

 

Advanced Settings

 

 

 

Beacon Interval

When a wirelessly network device sends a beacon, it includes with it a beacon interval.

 

This specifies the time period before the device sends the beacon again. The interval tells

 

receiving devices on the network how long they can wait in lowpower mode before waking

 

up to handle the beacon. A high value helps save current consumption of the access point.

 

 

DTIM Interval

Delivery Traffic Indication Message (DTIM) is the time period after which broadcast and

 

multicast packets are transmitted to mobile clients in the Active Power Management

 

mode. A high DTIM value can cause clients to lose connectivity with the network.

 

 

Output Power

Set the output power of the NWA in this field. If there is a high density of APs in an area,

 

decrease the output power of the NWA to reduce interference with other APs. Select one

 

of the following Full (Full Power), 50%, 25%, or 12.5%. See the product specifications

 

for more information on your NWA’s output power.

 

 

Preamble Type

Select Dynamic to have the AP automatically use short preamble when wireless adapters

 

support it, otherwise the AP uses long preamble.

 

Select Long if you are unsure what preamble mode the wireless adapters support, and to

 

provide more reliable communications in busy wireless networks.

 

 

RTS/CTS

(Request To Send) The threshold (number of bytes) for enabling RTS/CTS handshake.

Threshold

Data with its frame size larger than this value will perform the RTS/CTS handshake.

 

Setting this attribute to be larger than the maximum MSDU (MAC service data unit) size

 

turns off the RTS/CTS handshake. Setting this attribute to its smallest value (1) turns on

 

the RTS/CTS handshake.

 

 

Fragmentation

The threshold (number of bytes) for the fragmentation boundary for directed messages. It

 

is the maximum data fragment size that can be sent.

 

 

Extension

You can use CTS to self or RTS-CTSprotection mechanism to reduce conflicts with other

Channel

wireless networks or hidden wireless clients. The throughput of RTS-CTSis much lower

Protection Mode

than CTS to self. Using this mode may decrease your wireless performance.

 

 

A-MPDU

This field is available only when 802.11n, 802.11b/g/n, 802.11a/n or 802.11a/n/ac

Aggregation

is selected as the Wireless Mode.

 

Select to enable A-MPDU aggregation.

 

Message Protocol Data Unit (MPDU) aggregation collects Ethernet frames along with their

 

802.11n headers and wraps them in a 802.11n MAC header. This method is useful for

 

increasing bandwidth throughput in environments that are prone to high error rates.

 

 

Short GI

This field is available only when 802.11n, 802.11b/g/n, 802.11a/n or 802.11a/n/ac

 

is selected as the Wireless Mode.

 

Select Enabled to use Short GI (Guard Interval). The guard interval is the gap

 

introduced between data transmission from users in order to reduce interference.

 

Reducing the GI increases data transfer rates but also increases interference. Increasing

 

the GI reduces data transfer rates but also reduces interference.

 

 

60

 

NWA1120 Series User’s Guide