6.1 Resetting the ZyXEL Device
This changes all the ZyXEL Device’s settings to their original values. You have to make all of your changes again. See section 1 on page 2 for information on default settings.
"Make a note of your settings before you reset the ZyXEL Device.
To reset the ZyXEL Device,
1 Press the RESET button until the POWER light starts to blink. (This usually takes ten seconds or less.)
2Release the RESET button.
6.2Setting Up Your Computer’s IP Address
"Follow these instructions only if you are following a suggestion in Troubleshooting.
This section shows you how to set up your computer to automatically get an IP address from the ZyXEL Device.
6.2.1 Windows NT/2000/XP
1In Windows XP, click Start > Control Panel.
In Windows 2000/NT, click Start > Settings > Control Panel.
31