ZyXEL Communications P-2302HWUDL-P1 2 Hardware Connections - P-2302HWUDL-P1

P-2302HWUDL-P1 Quick Start Guide

2 Hardware Connections - P-2302HWUDL-P1

1WAN: Use an Ethernet cable to connect the DSL modem to this port.

2LINE: Use the green PSTN cable to connect the TEL or PHONE jack on a splitter to this port. If no splitter is provided connect the telephone jack to this port.

Note: When the ZyXEL Device does not have power, only the phone connected to the PHONE 1 port can be used for making calls. Ensure you know which phone this is, so that in case of emergency you can make outgoing calls.

3ETHERNET 1-4: Use an Ethernet cable to connect a computer to this port for initial configuration and/or Internet access.

4PHONE 1-2: Use telephone cables (and any telephone adaptors provided with your P-2302HWUDL-P1) to connect your telephones to these ports. If you only have one telephone, you should use port 1.

3