P-660R-T1/T3 v2 Quick Start Guide
B)Make sure you enter the password correctly (the field is case sensitive). If you have forgotten the P-660R-T1/T3 v2’s password, use the RESET button. Press the button in for about 10 seconds (or until the POWER light starts to blink), then release it. It returns the P-660R-T1/T3 v2 to the factory defaults (IP address 192.168.1.1, password 1234).
C)Make sure your computer’s IP address is in the same subnet as the P-660R-T1/T3 v2’s LAN IP address (see Set Up Your Computer’s IP Address section).
D)Ping the P-660R-T1/T3 v2 from a computer on the LAN. Make sure your computer’s Ethernet adapter is installed and functioning properly. In the computer, click Start, (All) Programs, Accessories and then Command Prompt. In the Command Prompt window, type "ping" followed by the P-660R-T1/T3 v2’s LAN IP address (192.168.1.1 is the default) and then press [ENTER] on your keyboard. The P-660R-T1/T3 v2 should reply; if it does not, see Set Up Your Computer’s IP Address section.
E)If the P-660R-T1/T3 v2’s IP address has changed, enter the new one as the URL. If you have forgotten the new IP address, use the RESET button (see step B).
F)Make sure you allow pop-up windows, JavaScripts and Java permissions or set the Internet security level lower than High in Internet Explorer (in Internet Explorer, click Tools > Internet Options > Security > Custom Level...). See the appendix in the User’s Guide for more information.
