ZyXEL Communications P-660R-T1/T3 V2 2 Set Up Internet Access

P-660R-T1/T3 v2 Quick Start Guide

After you’ve made the connections, push in the power button to turn on the P-660R-T1/T3 v2. Look at the LEDs.

•The POWER LED blinks while performing system testing. It then turns steady on if the testing is successful.

•The DSL LED blinks then turns steady on, and blinks when there is traffic.

•The ETHERNET LED turns on if the ETHERNET port is properly connected, and blinks when there is traffic.

If none of the LEDs are on, unplug the device and recheck your hardware connections.

2 Set Up Internet Access

You can configure the P-660R-T1/T3 v2 for Internet access in any one of these ways:

A:Configuration Genie.

B:Zero Configuration.

C:Web Configurator Internet Access Wizard.

2