ZyXEL Communications P-660R-T1/T3 V2 Set Up Your Computer’s IP Address

P-660R-T1/T3 v2 Quick Start Guide

2 If you cannot access the Internet when your computer is connected to the ETHERNET port, follow these steps.

A)Check the lights on the front panel. If they are different from what is described in section 1, make sure the connections are correct. If the lights are still different, turn off the device, wait a few seconds, and turn it on again.

B)Follow the steps in Set Up Internet Access section again. Make sure you enter the correct information. For example, if your account has a user name and password, make sure you type it correctly. In addition, if you are not sure which encapsulation your ISP uses, contact your ISP.

C)If you are using a new Internet account, contact your ISP to make sure it is active.

D)If you still have problems, see Troubleshooting in the User’s Guide.

Set Up Your Computer’s IP Address

This section shows you how to set your Windows NT/2000/XP computer to automatically get an IP address. This ensures that your computer can connect with your P-660R-T1/T3 v2. Refer to your User’s Guide for detailed IP address configuration for other Windows and Macintosh computer operating systems.

1Click start (Start in Windows 2000/NT) > Settings > Control Panel.