Chapter 3 Wizard Setup

3.2.5 DHCP Setup

DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows individual clients to obtain TCP/IP configuration at start-up from a server. You can configure the ZyXEL Device as a DHCP server or disable it. When configured as a server, the ZyXEL Device provides the TCP/IP configuration for the clients. If you turn DHCP service off, you must have another DHCP server on your LAN, or else the computer must be manually configured.

3.2.5.1 IP Pool Setup

The ZyXEL Device is pre-configured with a pool of IP addresses for the DHCP clients (DHCP Pool). See the product specifications in the appendices. Do not assign static IP addresses from the DHCP pool to your LAN computers.

3.2.6 Internet Access Wizard Setup: Third Screen

Verify the settings in the screen shown next.

Figure 11 Internet Access Wizard Setup: Third Screen

If you want to change your ZyXEL Device LAN settings, click Change LAN Configuration to display the screen shown next. Otherwise, click Log on to the Internet! to save the configuration. Skip to Section 3.2.7 on page 46.

 

45

P-660RU-T v2 User’s Guide